Title

Home
Articles Search
stage one

Articles search results for stage one

Showing 1 to 20 of 136 articles

Engine - 998 tuning, bolt-ons (stage one)

The 998cc engine is a very robust and tunable unit. It is also the most common engine found in standard Minis. Despite the lure of the much-advertised 1380cc alternatives, many simply want to get a little more from what they have at reasonable outlay.

Terminology:
MSC/MM - Mini Spares Centre/Mini Mania
BBU - Big Bore Unit (refers to all 1275cc-based units)
SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998)
BHP - Brake Horse Power
CR - Compression Ratio

To improve engine out-put, you need to increase the engine's 'breathing' ability. The stage one kit deals with all the easily bolted-on external parts, and represents the best increase for investment. From here on in the power increases will cost commensurately more money.

Beware: Instructions must be read carefully.

Although the 998/1300 stage one kits are bolt on parts easily fitted by any person with mechanical knowledge, the following must be understood.

Both Keith Calver and Keith Dodd have fitted the Mini Spares kit to their 1000cc cars. Keith Calver was involved in getting the ignitions and needle settings correct at Peter Baldwin’s (Marshalls) rolling road in Cambridge.

Many people already have some of the parts on their car without know how close they are to extra power. The parts required are the original Competition Silencers exhaust RC40, Mini Spares special inlet manifold, Maniflow freeflow exhaust manifold...

THE TRUTH, THE WHOLE TRUTH AND NOTHING BUT THE TRUTH! When we started on the electronic management system for our 8-Port, it was also our idea to make a system for the latest fuel injection Minis.At the same time,Glyn Swift (Swiftune) had started work on a unit with M.B.E.Electronics,but even at a fairly advanced stage, it was still having reliability problems,so it was withdrawn from the market. Swiftune,as you will know from previous articles....

SUSPENSION - Terminology

Glossary of terms used in the suspension on the mini. The Mini has consistently more than proven its capability in competition with very limited and cost-effective modifications based on the standard equipment fitted. Having first ensured the bodyshell (in reality little more than a complex bracket to hold suspension and driver securely in place) is well sorted out by removing all cruddy or rotten metalwork and into something like straight, square and strong we, maximising suspension stability and geometry pays dividends in the enjoyment that is driving a Mini. Understanding what the individual ingredients are helps in pursuing what you want from the experience. Smooth Mover Good, reliable, and consistent handling is dependent on a number of factors. At this stage, we’re concerned with clapped out or badly adjusted suspension components. Stiff, seized, partially seized or slack, sloppy, worn out suspension components will cause inconsistent, wayward, confusing and – more important

A barmy mid summer-esque May weekend greeted the Super Mighty Mini championship to rounds 3 and 4 at Snetterton, Norfolk. Jokingly nick-named the Far East round by some drivers due to its location, Snetterton is a circuit that as seen some of my better results.

Saturday qualifying saw me achieve a hassle...

During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. So the idea was to finish the engine off using a relatively 'mild' specification to maximise drivability. The camshaft used was the fantastically versatile Swiftune Racing SW5 profile that provides drive from nowhere up to 7,000rpm - d

Rocker gear - General compendium

Whether you’re building a solid road performer or fire-breathing monster, the main goal is to improve air/fuel flow into the engine. The more you can get in, the more power you can get out. Cheapest chunk of power improvement comes from sorting the asthmatic manifolding and exhaust by applying a stage one kit. Then what? Considering the ‘get more in to get more out’ theme, the main restriction - all else being equal - is the valves and their behavior. How big they are, how efficient they are and how long they’re open for determines how much gets in with each gulp each bore/piston makes. Modified cylinder heads are popularly next, although it has to be said that although a well modified cylinder head will improve performance, the gain against cost is nowhere near that given by the ‘stage one’ kit application. A good stage one kit’s improvement verses cost is around £12.50 per 1 hp, a decent modified head typically £30 per 1hp - dependent on application. Hmm.

MSE6 - POST 1992 Unleaded Stag

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. Three-angle valve seats in head. Super-quality MG Metro valves modified to increase airflow. MSE6 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE6, TAM1059, TAM1061, TAM2069, 12G1963, 12G1015, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Original equipment type P/No. TAM1059 Exhaust Valves: 29.2mm(1.150") dia. Original equipment type P/No. TAM1061 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: AE Hepolite cast iron P/No. 12G1963 Valve Springs: Nominal 140lb. Max actual valve lift 0.400" P/No. 12G1015 Stem Seals : Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Combustion chamber volume used to give slight static compression ratio increase over

MSE6 - POST 1992 Unleaded Stag

MSE4 - Post 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE4 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE4, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves: 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: Magnesium bronze P/No. C-AEA526 Valve Springs: Nominal 180lb. Max actually valve lift 0.500" P/No. C-AJJ4037 Stem Seals: Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Three-angle valve seats in head. Cooper S size valves with current maximum flow profiles and Tuftrided for durability/longevity when used with unleaded fuel (hence 'black' finish).

MSE4 - Post 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE4 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE4, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves: 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: Magnesium bronze P/No. C-AEA526 Valve Springs: Nominal 180lb. Max actually valve lift 0.500" P/No. C-AJJ4037 Stem Seals: Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Three-angle valve seats in head. Cooper S size valves with current maximum flow profiles and Tuftrided for durability/longevity when used with unleaded fuel (hence 'black' finish).

MSE3 -Pre 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE3 - PRE 1992 unleaded Stage 2 (Road Rocket) large-bore head Part No Applications: MSE3, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides Magnesium bronze P/No. C-AJJ4037 Valve Springs Nominal 180lb. Max actually valve lift 0.500" P/No. C-AEA526 Stem Seals Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume Nominal 20cc

Engine - 1098, Initial Tuning

The 1098 (1100) engine has had a lot of bad press over the years - largely because of early experiences when trying to tune the motor brought about problems with the then standard components available - they simply were not up to taking any real punishment as experienced in racing.

See bottom for useful part numbers.

This fallacy was handed down generation to generation like some scary bedtime story. Those that have used the unit in more recent years, employing more capable componentry know what a demon motor this can be. Following is an initial look at what it will do with a little modification - the results compared directly with it's smaller brother the 998 for illustration of the potential.

Abridged History
When the Mini was first conceived it ustilised a de-stroked version of the then quite remarkable 948cc A-series engine.

Engine - 998 Tuning, Bolt-ons

The 998cc engine is a very robust and tunable unit. It is also the most common engine found in standard Minis. See bottom for useful part numbers Terminology: MSC/MM - Mini Spares Centre/Mini Mania ID - Inside Diameter OD - Outside Diameter BBU - Big Bore Unit (refers to all 1275cc-based units) SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998) BHP - Brake Horse Power LCB - Long Centre Branch Despite the lure of the much-advertised 1380cc alternatives, many simply want to get a little more from what they have at reasonable outlay. The single biggest restriction on any standard Mini is the 'breathing apparatus' - anything that is connected to the induction and exhaust systems. The standard exhaust being the biggest culprit - it is desperately restrictive in the name of noise suppression and cheapness of manufacture. Oddly enough it also increases fuel consumption when tested over a better designed, fre

Round 7 of the 2004 MSA British Historic Rally Championship saw crews heading across the Channel for the only European round, The Tour of Flanders , based in Roeselare in Belgium, on Saturday and Sunday 10/11th September.

Dry weather and 14 closed public road stages challenged the crews over two days ,with the long straights and dangerous ditches favouring the quicker cars and the braver...

The red lights went out after a short wait and the 2005 season was underway. I held position and went early on the attack,

It seems remarkable, but a winter break of over six months is never enough time to prepare a racing car! The truth is, at long last I've completely refurbished the hall, stairs and landing at home. That concludes a 7 and a half year ...

Air filtration - K&N Air cleaner test.

In the forefront of Mini tuning, improving the over-all breathing capability of the very asthmatic A-series the air filter set-up is one that sees priority attention. All the widely available (and widely varying) stage one tuning kits include at the very least a replacement - and hopefully - high-flow air filter element to fit into the standard plastic case,

In the past few years (well, must be nearly 6 years by now!) since I got involved with writing for the specialist Mini Magazines I have been continually fighting with the problem of limited space. This has limited what I have been able to cover, both in subjects and in details. Up until recently (say the past year or so) I have been covering fairly broad topics in a fairly broad terms and detail. Basically trying to cover perhaps the most popular areas dabbled in by the Mini owning masses.

A+ head castings - despite having the same 12G940 casting number - are considerably different in appearance, loosing the flat area behind the thermostat housing and around the rest of the rocker/head stud areas to a sculptured look - where these areas are replaced by a 'sunken' cast finish. The A+ castings were introduced with the appearance of the Metro in 1980, although some late 1275GTs (1979-on) had them fitted. Generally they are easily recognised by their colour - a putrid yellow on the small-bore castings and bright red on the large-bore ones, a paint finish that is VERY difficult to remove, even in a chemical tank. The MG

See bottom for useful part numbers.

Now this may not be super-sonic speed-inducing power, it could just as well be for maximum economy. In either case, it's the engines volumetric efficiency (VE) under scrutiny - it's ability to breath in as much correctly proportioned air/fuel mix as possible in any given situation.

Articles search results for stage one

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals